Phone: +91-9988099992 Email: info@farmwiseglobal.com

Export












Submersible Motors :-

Farmwise brand makes highly efficient and best Quality Wet type submersible motors according to international standard.

Salient Features


  • Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
  • Rotors are painted with special epoxy paint for long life.
  • Motor design for wide voltage range.
  • Mounting Diameters are as per NEMA Standard.
  • Motor shaft are made from fully stainless steel.
  • Rotors are balanced in precision grade to reduce vibration & noise
  • E.C. grade Copper(99.90%) has been used.
  • Casting parts are also available in SS 304 / SS 316.
  • All rubber parts are made from Nitrile butadiene rubber (NBR).
  • All hardware are used of SS 304.

Application


  • Irrigation/Sprinkler
  • Commodity water supply.
  • Industrial.
  • High rise buildings.

Material of Construction


  • Upper, Lower, Bottom : Cast Iron FG 200 / SS 304 / SS 316
  • Radial Bearing Bush : Leaded tin bronze / Carbon CY 100
  • Lamination : Silicon steel.
  • Thrust Bearing : Carbon v/s Stainless Steel tilting pad.
  • Cable : PVC 3 core flat / Rubber H07RFN
  • Winding Wire : PVC / Polyester wrapped wire
  • Motor Shaft : Stainless steel AISI 410.

Optional


  • Mechanical seal.
  • CED special coated casting parts.
  • Chrome platted casting parts.

Technical Specifications


Motor Rating :-
  • 4” (100mm) Submersible Motor – 0.5HP to 3.0HP (1 Phase)
    – 0.5HP to 7.5HP (3 Phase)
  • 6” (150mm) Submersible Motor – 3.0HP to 50.0HP
  • 8” (200mm) Submersible Motor – 20.0HP to 75.0HP
Voltage Range :-
  • Mono phase (1 phase) – 220V (150V TO 250V)
  • Three phase (3 phase) – 380V (200V TO 440V)

Frequency :-

  • 50Hz / 60Hz (22OV /380V /440V)

Submersible Pumps :-

Farmwise brand makes highly efficient durable and best Quality submersible pumps according to international standard.

Salient Features


  • Pumps are design for maximum water discharge.
  • Pump shaft are made from fully stainless steel.
  • Impeller are dynamically balanced to precision grade to reduce noise & vibration.
  • Mounting as per NEMA Standard.
  • All hardware used of SS 304 Material.
  • Non Return Valve provision in each pumps.
  • Upper thrust provided in each pumps.
  • Hard chrome sleeve to withstand in sandy condition.
  • Sand Protection provided.
  • Available in Radial & Mix Flow design.

Application


  • Irrigation/Sprinkler
  • Commodity water supply.
  • Industrial.
  • High rise buildings.

Material of Construction


  • Pump Shaft : Fully Stainless Steel AISI 410
  • Suction / NRV : Cast Iron FG 200 / SS 304 / SS 316
  • Impeller : Stainless Steel AISI 410/ NORYL 30% Glass filled / SS 304
  • Diffuser : Cast Iron FG 200 grade/ NORYL 30% Glass filled / SS 304
  • Pump Casing : SS 304.

Optional


  • 1.CED Special coated parts.
  • Chrome platted casting parts.
  • Mesh coupling(Key type).

Technical Specifications


A) 4”(100mm) Submersible pumps in SS 304 Fabricated pump.

  • Head Range :- 10 Mtrs to 425 Mtrs
  • Discharge Range :-0.4m3/hr (7LPM) TO 12 m3/hr (200 LPM)

    • B) 4”(100mm) Submersible pumps in stainless steel (Tubular type)

  • Head Range :- 4 Mtrs to 302 Mtrs
  • Discharge Range :-0.6m3/hr(10 LPM) TO 27m3/hr (450 LPM)

    • C) 6”(150mm) Submersible pumps in SS 304 High head

  • Head Range :- 10 Mtrs to 450 Mtrs
  • Discharge Range :-2.4m3/hr(40LPM) TO 46.8m3/hr (780 LPM)

    • D) 6”(150mm) Submersible pumps in SS 304 Fabricated pumps.

  • Head Range :- 89 Mtrs to 466 Mtrs
  • Discharge Range :-8m3/hr(133LPM) TO 78m3/hr (1300 LPM)